Concrete Cleaner
|
PRODUCT
DESCRIPTION |
RECOMMENDED USES |
|
V-SCRUB HD Concrete Cleaner is an industrial strength powder cleaner designed to tackle even the toughest cleaning needs on most cementitious surfaces. V-SCRUB HD will tackle heavy duty cleaning jobs in areas such as: parking garages & airports, wherever an industrial strength cleaning is needed. V-SCRUB HD is very effective with oil, rust stains and harshly blemished concrete. V-SCRUB HD is sold in powder form allowing you to mix it to the strength potency you need for each job.
* As a rule of
thumb – If the V-SEAL HD won’t bring stains out, they usually won’t
come out!
With
the assistance of V-SEAL OCA #48,
(Organic
Microbe Hydrocarbon Cleaning Agent),
stains have very little chance of existence. The
possibility of damage to the concrete surface may occur if other
abrasive methods are used. |
For use on Cementitious Applications
·
Ideal for
– Heavily stained & soiled areas
·
Excellent prep for:
– Sealing & Epoxies
·
Commercial/Industrial Strength Cleaning
·
Ideal for:
Driveways
Basements
Pre-cast
Brick / Pavers
Masonry products / Plaster
Pool decking / Gunite / Marcite Bridges / Tunnels /| Stucco
Parking Garages, Airports
|
PRODUCT CHARACTERISTICS |
APPLICATION
/ USAGE |
|
Color:
White powder Average Spread Rate: 200-300 ft. p/gal. Application Time:
On avg. let dwell
for 15-30
mins.
(a second application may be
necessary for stubborn areas) Shelf Life: 9 yearsClean Up:
Soap and Hot Water HAZARDOUS COMPONENTS
Chemical
Name – Sodium Hydroxide, solid:
OSHA
PEL
2mg/m3 ACGIH TLV 2mg/m3
% by weight =
20 %
Chemical
Name-Sodium Metasilicate, Anhydrous: OSHA PEL NEACGIH TLV NE
% by weight =
20 %
SECTION
II: Health
Hazards Eyes – Corrosive Skin - Corrosive
Ingestion
-- Corrosive No Carcinogens (NTP/IARC/OSHA) |
·
Petroleum based stains – Oil/Grease/Etc.
Mist stain with water to dampen. Apply power directly to stain. Add water and agitate to form a paste. Allow paste to dry. Broom clean or rinse with pressure washer. · Dry Application: Mist area to dampen. Broadcast V-SCRUB powder over the area to be cleaned. Allow cleaner to dwell 15-30 minutes for best results. Agitate with broom and rinse with garden hose of pressure wash using surface cleaner or wand. · Wet Application: Mix solution to strength following directions on container. Apply solution directly to dry concrete. For best results allow solution to dwell 15-30 minutes.
Clean with high-pressure washer.
·
MATERIALS
TO AVOID –
V-SCRUB HD
is incompatible with strong
acids – Avoid *
AVOID INHALING FUMES * * CAUTION: SLIPPERY WHEN WET *
|
( OVER )

RECOMMENDED SYSTEMS |
SURFACE PREPARATION / APPLICATION |
|
Ideally, the best time to use V-Scrub HD is just before application of other V-Seal products and when rain is not present.
* V-Scrub
EPA is excellent as a
maintenance cleaner for previously V-Sealed projects.
V-Scrub is
not recommended for use on:
Wood....No
Metal....No
Plastic...No
Cementitious
substrates & surfaces....Yes Benefits: V-Scrub HD Concrete Cleaner is a special formulation that consists of the latest technology in concrete cleaning performance. |
Wet surface to be cleaned.
Sprinkle or broadcast the powder cleaner.
(You can mix with water and apply as a 50/50 solution – adjust as
needed) Allow to dwell for 15-30 minutes.
Agitate surface with a broom when possible.
Rinse well. On tough
areas, sometimes a second application may be needed or a paste can be
made and applied and let to work 15-30 minutes.
Rinse well. Paste
can be used as a pre-spot lifter also.
|
|
ORDERING/SHIPPING
INFORMATION |
|
SECTION IX:
Packaging:
10 gal. tubs
30 lb. tubs
Shipping:
UPS for small quantities
Truck for larger quantities
Freight
Class: N/A |
|
|
SAFETY/FIRST
AID
PRECAUTIONS |
LIMITATIONS/REGULATORY
/ MSDS
DATA |
|
SECTION III
– IV:
FIRST AID:
CAUTION !
**
This product
is highly caustic and
corrosive to eyes, skin and membranes and will cause severe burning.
Avoid contact with skin & eyes:
Wear chemical splash goggles and protective gloves.
Use ventilator and in ventilated area.
Symptoms of Exposure: Redness and/or burning of skin or eyes.
Difficulty breathing.
V-SCRUB HD will etch aluminum and glass.
V-SCRUB HD, at full strength
will even strip paint. Thoroughly rinse equipment down with
fresh water after use.
Emergency Procedures:
Eyes:
Immediately flush with water for at least 15 minutes.
Get medical attention.
Skin:
Remove contaminated clothing and wash exposed areas thoroughly
with soap and water. If
irritation occurs, call a physician.
Inhalation:
Move subject to fresh air.
Get
medical help
immediately.
Ingestion:
DO NOT INDUCE VOMITING. Drink large quantities of water to
dilute. Get medical help
immediately.
|
SECTIONS V –
VIII:
Non-Flammable:
N/A Flashpoint: (TCC) N/A
Boiling
Point:
N/A
Solubility:
Complete
Volatile by
Vol.
N/A
Appearance:
White
Odor:
None
Evaporation
Rate: ( Butyl Acetate
= 1 ) N/A
Vapor
Density:
( Air = 1 ) N/A
Vapor
Pressure:
( 9mm Hg. ) N/A
Melting
Point:
NE
Specific
Gravity:
( H2O = 1 ) N/A
Reactivity
Data:
Product is stable.
Avoid contact
with acidic materials.
Hazardous
decomposition By-products – CO2, CO
Spill and
leak procedures:
Stop spill
or leak at source. Sweep up
and use if possible or put into container for disposal.
CAUTION ! CAUSTIC.
Use with care.
KEEP OUT OF REACH OF CHILDREN.
|
Manufactured for:
TARA Distr. Group, LTD /
Emergency Phone:
800-255-3924 /
Information
877-738-7325
Web site: www.vseal.com / E-mail: info@vseal.com
Distributed by: CSFCE 407-340-9591 Steve@csfce.com